WIDE Spectra: spectrometer and wavemeter
for tunable laser monitoring
• 630-1083 nm range
• 50-130 nm / measurement
• 15 pm spectral resolution
• 15 pm abs. accuracy
The WIDE Spectra is a unique spectrometer and wavemeter
to control and stabilize the output wavelength of your tunable
laser. Thanks to its wide measurement windows and its ultra-high resolution, it is now possible to monitor the spectrum of
your laser with accuracy and precision over a small or large
wavelength scan.
RESOLUTION Spectra Systems will present this
new product at Photonics West 2015, Booth 1223
info@resolutionspectra.com
www.resolutionspectra.com
Laser Beam Profiling for Large Beam Widths
Ophir Photonics, the global leader in precision laser
measurement equipment and a Newport Corporation
Company,
introduces
a large array
camera to the
BeamGage®
family of laser
beam profiling
systems. The
large format
LT665 Beam
Profiling Camera provides a 16 mm diagonal active area with
4. 5 µm square pixels (2752 × 2192 array), far better resolution
than competing CMOS cameras. The CCD array is built with
lower noise electronics and a unique thermal management
technology that delivers a more stable background; this
results in more consistently accurate results.
sales@us.ophiropt.com • + 1 435-753-3729
www.ophiropt.com/photonics
Pulse Selection System
ConOptics Pulse Selection
Systems are designed to be
compatible with your laser
source, from the fundamental
wavelength of
Ti: Sapphire,
2nd harmonic
or OPO’s.
Our system
will accept
mode lockers
or photo-diodes inputs
to sync to the
laser source and will
select pulses from a single shot with
rep-rates in excess of 30MHz.
19 Eagle Rd., Danbury, CT 06810
Phone: 800-748-3349
sales@conoptics.com
www.conoptics.com
Need Cooling?
Spectra-Mat is a US-based “Powder-To-Product”
manufacturer of high-performance WCu and MoCu
heatsinks, spacers, submounts,
carriers, bases and packaging
components for semiconductor
laser diodes, RF, Microwave, MMIC and power devices
based on GaN, GaAs and SiC devices.
Our vertically-integrated manufacturing process,
including plating, delivers:
• Homogenous materials with stable CTE for GaN, GaAs
and SiC up to over 450°C:
• Consistent high thermal conductivity (Tc).
• Superior mechanical characteristics such as flatness
of 2um over 10 mm to minimize semiconductor laser
stress and misalignment.
• Minimum thickness of spacers down to 127 µm.
• Edge radius of spacers to better than 15 µm.
• AuSn, AgAu and PbSn metallization is available.
• Brazed subassemblies with ceramics and/or Kovar to
WCu and MoCu.
www.spectramat.com
Andrew_rossi@saes-group.com
408.309.1316 • 831.722.4116, x326
smi_sales@saes-group.com
