Phosphate laser glass
APG-760 phosphate laser glass has
improved thermomechanical properties and is designed as an active material in laser systems with high pulse
powers, such as femtosecond lasers.
The glass is available with Nd3+ doping
from 1% to 4%.
The VCS20-20-03-MC-01-XYZ is a
closed-loop, voice coil-driven XYZ positioning stage. The XY horizontal axis
motors have a 50. 8 mm stroke, and
generate 8. 9 N of continuous force and
26. 7 N of peak force. The Z-axis motor
has a 6. 4 mm stroke, and generates
22. 3 N of continuous force and 66.8 N
of peak force.
Santa Clarita, CA
Gugolz optical polishing pitch comes in
five grades from very soft to very hard,
with melting points from 52° to 87°C.
It is ready to use without screening, filtering, or mixing additives. The pitch is
made from wood resin, and can be used
for CaF2, germanium, quartz, ZnSe, ZnS,
silicon, and other optical materials.
A scanning system includes edge tracking and seam topology measurement
based on optical coherence tomography
(OCT) to analyze
components to be welded and detect
errors in welding. The measuring beam
has its own scan system for positioning
all around the processing point. It gets
a detailed three-dimensional representation of the weld seam for quality assurance.
The T6Air lightweight fluid-cooled laser
diode array is designed with micro-optics instead of bulky waveguides for
handheld medical devices. The device
is designed to eliminate significant coupling of light reflected from a patient’s
skin back into the laser array.
The Power Wave2000 infrared source
offers adjustable output power averaging 30 W, with up to 50 W available.
The beam quality (M2) is < 1. 1 for pre-
cise positioning, focusing, and super-
resolution spectroscopy. Wavelength is
customizable from 1900 to 2050 nm.
Operating bandwidth is < 1 nm and
power stability is ±2%.
The LD2100 series pyroelectric detector with differential outputs is based on
the company’s current mode detector.
When used with a differential amplifier,
the detector doubles the signal compared to a single-ended detector, with
an improvement in signal-to-noise ratio
of 1. 4. It is designed for NDIR and FTIR
spectroscopy, IR laser measurement,
The DXR+ rotary module has a large
hollow shaft for applications in semiconductors and electronics. It can be
operated from 48 up to 300 VDC bus
voltage and driven by an AccurET modular 48 or 300, or by an AccurET VHP.
It can be mounted on any standard